Tips for printing:

Filament: PLA

Supports: No!

Layer height: 0.16mm (optimal)

Wall loops: 3

Infill: 15%

Seam position: back

Wall generator: classic

Detect thin walls: No!

Brim: No!

BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Do not scale the Frog any smaller otherwise the connections will no longer work!

Colors and filament I used (4 Colors):

PLA Matte / Green

PLA Matte / Black

PLA Matte / White

PLA Matte / Yellow

Colors and filament I used (3 Colors):

PLA Matte / Green

PLA Matte / Black

PLA Matte / White

Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste! Or you can use my multiple parts version to avoid filament waste!