Tips for printing:

Filament: PLA (Good Calibrated Filament! Over-extrusion will lead to problems with the joints!)

Supports: No!

Layer height: 0.16mm (optimal)

Wall loops: 3

Infill: 15%

Seam position: back

Wall generator: classic

Detect thin walls: No!

Brim: No!

BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Do not scale the Spider any smaller otherwise the connections will no longer work!

Please be careful when removing the Spider from the print bed!

Colors and filament I used (2 Colors):

PLA Matte / Black

PLA Matte / White

Colors and filament I used (3 Colors):

PLA Matte / Black

PLA Matte / White

PLA Matte / Red

Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!