Tips for printing:

Supports: No

Layer height: 0.16mm (optimal)

Wall loops: 3

Infill pattern: Aligned Rectilinear

Infill: 15%

Seam position: back

Wall generator: -

Detect thin walls: -

Brim: Yes

Colors and filament I used (4 Color Version):

PLA / White - for the body and eyes

PLA / Black - for the eyes

PLA / Red - for the face

PLA / Orange - for the beak

Or decide for yourself which colors and how many you want to use!

When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!

---------------------------------------------

Multiple Parts:

Tips for printing:

Supports: Yes! Snug Supports!!!!

Layer height: 0.16mm (optimal)

Wall loops: 3

Infill pattern: Aligned Rectilinear

Infill: 15%

Seam position: back

Wall generator: use Classic!!!! (Don't use Arachne!)

Detect thin walls: No!!!

Brim: No, but if you don't have good adhesion use a brim!

Part Orientation: Print as orientated

Colors and filament I used (4 Colors):

PLA Matte / White

PLA Matte / Black

PLA Matte / Red

PLA Matte / Orange

All parts are marked with the color intended for them. Or decide for yourself which colors and how many you want to use!

The hair requires more force when affixing. Please use tweezers to glue the inner eyes in place! All parts are secured with glue!