Say goodbye to tangled paracord, messy guy lines, and frustrating knots at your campsite. The Cable-Guy Rope Winder is a rugged, compact, and highly efficient 3D-printed solution designed to store, deploy, and organize your outdoor ropes with ease. Whether you are managing tent lines, camping ropes, or general utility cords, this utility winder keeps everything neatly contained and ready for instant action.

Key Features
Tangle-Free Management: Enclosed drum housing protects your rope from knots and dirt.
Ergonomic Crank Handle: Quick-winding manual lever lets you pack away dozens of feet of cord in seconds.
Travel-Ready Design: Lightweight and durable, perfect for tossing straight into your camping pack or tactical gear bag.
Component Guide
Before assembling, ensure you have 3D printed all three core components:

The Outer Housing.
The Internal Spool & Lid.
The Handle.

Assembly & Loading Instructions
Follow these steps to assemble your winder and properly load your rope:

Step 1: Install the Crank Handle
Insert the square peg of the yellow Crank Handle up through the center alignment hole on the bottom of the black Internal Spool cylinder. Press it firmly until the square peg protrudes securely through one of the matching square slots at the top of the spool core

WhatsApp Image 2026-06-25 at 17.51.46 (1).JPG

Step 2: Secure Your Rope
Take the end of your camping rope or paracord and feed it into the side teardrop hole of the black spool core, pulling it through case and the top opening. Tie a secure stopper knot at the end of the rope to prevent it from slipping back through.

WhatsApp Image 2026-06-25 at 17.51.45 (1).jpeg

Step 3: Thread and Align with the Housing
Lower the entire black spool assembly into the yellow drum, ensuring the bottom of the spool sits flush over the central rotating axis.

WhatsApp Image 2026-06-25 at 17.51.45.jpeg

Step 4: Wind it Up!
Hold the outer case firmly with one hand and turn the Handle counter-clockwise to effortlessly wind your cord cleanly into the protective shell.

Boost Me

If you like this model please consider boosting the model, it helps me design more cool and functional stuff.

Boost

Cable-Guy Rope Winder

MullerMade

Impostazioni di stampa(1)

0.2mm layer, 2 walls, 15% infill

Descrizione

Licenza

Tag

Modelli correlati