Hi ! My print of "4 Elemental Pack - PRESUPPORTED - 32mm scale - D&D" by "Printed Obsession" Printer: "Halot-Mage Pro" Files: "STL_Elemental_Fire_Supported.stl", "STL_Elemental_Water_Supported.stl", "STL_Elemental_Earth_Supported.stl", "STL_Elemental_Air_Supported.stl" Scale: 100% Sliced with: Halot Box (v4.4.0.3575 win64) Layer height: 0.05 mm Resin used: Creality Water Washable Resin Plus White Exposure time of normal layers: 2.2s ( printing environment temperature: ~14°C ) I had a printing failure for "STL_Elemental_Water_Supported.stl" (the supports at the base, played their role poorly) I reprinted it this time without Anti Aliasing and adding manualy, around ten strong supports to the base. After a quick soak in a "dirty" 99.9% isopropyl alcohol tank, removal of most of the printing supports, cleaning again but this time in a "clean" 99.9% isopropyl alcohol tank, a drying time, a UV treatment (~2 minutes) and removal of last pieces of printing supports. Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !