Adding Fillets to All Feature Edges in Fusion 360 To add fillets (rounded edges) or chamfers (beveled edges) to all the edges of a feature, follow these steps: 1. **Select the Feature**: In Fusion 360, go to the browser or timeline on the left side of your screen. Find and select the feature you want to modify, such as an extruded block. 2. **Apply the Fillet or Chamfer**: Once the feature is selected, all its edges will be highlighted. Now, you can apply a fillet or chamfer. Specify the dimension (size) you want for the fillet or chamfer. 3. **Confirm**: Click to apply the change. All the edges of the selected feature will have the fillet or chamfer applied with the same dimension. By following these steps, you can easily add uniform fillets or chamfers to all the edges of a specific feature in your design.