✨ Jesus Has Risen – Multi‑Use Box / Holder / Planter Pot
This 3D‑printed piece is a meaningful blend of function and faith, designed as a versatile container that can serve as a planter pot, desk organizer, trinket box, pen holder, or decorative display piece. The front features a beautifully carved relief of the empty tomb, the cross, and the bold declaration: “Jesus Has Risen.”

The raised textures give the model a handcrafted, stone‑carved look, making it stand out whether printed in a single color or finished with paint or dry‑brushing. The interior is smooth and spacious, allowing it to be used for practical storage or as a symbolic planter for new life — a perfect tie‑in to the Easter message of renewal.

This model works beautifully as:

A small planter for succulents or herbs
A pen or tool holder on a desk
A prayer box or scripture card holder
A gift container for Easter
A decorative piece for home, office, or church displays
It’s a functional reminder of hope, resurrection, and the promise of new beginnings.

✝️ The Easter Story
Easter celebrates the most transformative moment in Christian history — the resurrection of Jesus Christ. After His crucifixion, Jesus’ body was placed in a sealed tomb. Guards stood watch, and a massive stone blocked the entrance.

But on the third day, everything changed. The stone was rolled away. The tomb was empty. Jesus had risen, just as He said He would. His resurrection is the victory of life over death, hope over despair, and light over darkness.

This model honors that moment: the cross, the empty tomb, and the triumphant message “Jesus Has Risen.” Whether used as décor or as a functional container, it serves as a daily reminder of renewal, redemption, and the power of faith.

🖨️ Recommended Print Settings
These settings keep your uploads consistent and beginner‑friendly while ensuring clean detail:

General
Printer Type: FDM/FFF
Material: PLA recommended
Layer Height: 0.20 mm (0.16 mm for sharper text)
Walls: 2–3
Top/Bottom Layers: 4–5
Infill
Density: 10–15%
Pattern: Grid or Gyroid
Supports
Supports Needed: No (model is designed to be support‑free)
If needed: “Touching Buildplate” only
Build Plate
Nozzle Temperature: 200–210°C
Bed Temperature: 55–60°C
Adhesion: Skirt or Brim depending on your printer’s cooling
Orientation
Prints upright as shown
No special rotation required
Finishing Tips
Dry‑brush silver, bronze, or stone colors for a carved‑stone effect
For planters, seal the inside with a thin coat of clear acrylic if using real soil