Creality CFS cannot accept big or small spools, and sometimes is necessary to rewind your filament.

I'm collected and prepared to print all models of the best-known rewinder, from Storm Design and MiklosKiszely.

Rewinding results is not perfect, but good (see pictures).

All necessary parts are assembled in plates, just print it.

I've changed some parts to improve functionality (in my opinion).

It is possible to use inner hexagon (inbus) or phillips screws (better stainless due to hardness).

Just one part is better to print with something stronger than PLA - Axle and Motor Shaft Connector.

Original manuals from Storm Design included. Many thanks to Damian27 (Storm Design) for his great job.

Other parts to build:

1) V-slot aluminum profile 20*20*600mm - 2pcs

2) M3 4mm heat-set threaded insert - 73pcs

3) M4 6mm heat-set threaded insert - 8pcs (spools axles)

4) M3 thread 8mm screw - 43pcs

5) M3 thread 12mm screw - 8pcs (for motor)

6) M3 thread 22mm screw - 20pcs (t-nut knobs)

7) M3 thread 25mm screw - 4pcs (knobs for autostop guide and donor brake)

8) M4 thread 25mm screw - 2pcs (spools axles)

9) M4 thread 40mm screw - 2pcs (spools axles)

10) M3 t-nut - 16pcs

11) 608 closed bearing - 9pcs

12) 6200 closed bearing - 8pcs

13) PC4-M10 PTFE connector - 2pcs

14) KW11-3Z-N switch

15) Geared motor 70:1 37Dx54.8L mm 12V, Pololu 4744 (or JGB37-3530 107rpm)

16) 12V 2A PWM Motor Speed Controller

17) PDC004 12V USB type C PD trigger

18) Some wires

19) Some PTFE tubes

20) Some superglue to fix PD trigger and the brake plate

21) Some blue threadlocker (for knobs and spool axles screws fixing)

Use drill bits in reverse direction to improve holes!

Use the glue for printing small parts, even for PEI plate!

Do not turn the winder by hand when the motor is connected to gears!

23.05.2025 Update:

- improved motor housing due to different PCBs,

- improved autostop guide PC4 threads,

3mf files:

- added some supports,

- all washers changed for the same size to simplify assembly.