Assassins comb for killer hairstyle! Printed 2 of them, 1 with PLA and the other with PETG PETG: Elas3d sides/ handles: printed together in orange petg, ( i shared the gcode file i used). comb&lock: printed together in blue petg. ( i shared the gcode file i used). PLA: Elas3d pla(silver) + esun silk pla(gold) sides/ handles: printed together in gold esun silk pla, ( i shared the gcode file i used). comb&lock: printed together in elas3d silver pla. ( i shared the gcode file i used). Assembly; Be careful when attaching the handles, you need to be gentle while doing so to prevent breaking it. Its durability/fragility depends very much on the material of choice (silk pla is the best, it flexes a lot), your print settings (infill density/pattern 15% and gyroid suggested). But once you fit it, it will work perfectly. Assembly video can be found at: https://youtu.be/5IY6wXwG2zc Printer: FDM - i used Creality K1Max Nozzle: 0,4mm Suggested Filament: Silk PLA, PLA, PetG Slicer software: creality print Layer Height: 0,2mm Wall line count:4 Top/Bottom Layers: 4 İnfill density: 15% infill pattern: gyroid Support: not needed