Hi ! My print, of "Pirate gnome" (the "with legs" version) by "PressPrint". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% (120% for the acc*.stl) File(s): tricorn hat(with legs).stl .gcode file: pg-noir_tricorn hat(with legs)-Ender-3 V3 KE_0.4_CR-PLA 215_52m.gcode Filament: PLA Recylé ArianePlast (~ 5,097m) ~ 00 h 54 m 19 s File(s): hat 2(with legs).stl .gcode file: pg-noir_hat 2(with legs)-Ender-3 V3 KE_0.4_CR-PLA 215_27m.gcode Filament: PLA Recylé ArianePlast (~ 3,000m) ~ 00 h 28 m 54 s File(s): acc3.stl (scale 120% and brim) .gcode file: pg-bleu-scale1.2acc3-Ender-3 V3 KE_0.4_CR-PLA 215_5m (2).gcode Filament: PLA Light Blue Velleman (~ 0,233m) ~ 00 h 06 m 10 s File(s): acc1.stl, acc4.stl (scale 120% and brim) .gcode file: pg-violet-scale1.2_acc1-acc4-Ender-3 V3 KE_0.4_CR-PLA 215_5m (2).gcode Filament: PLA Bleu métallisé ArianePlast (~ 0,260m) ~ 00 h 05 m 47 s File(s): acc2.stl (scale 120% and brim) .gcode file: pg-jaune-scale1.2_acc2-Ender-3 V3 KE_0.4_CR-PLA 215_2m (2).gcode Filament: PLA Yellow Velleman (~ 0,134m) ~ 00 h 03 m 10 s File(s): nose(with legs).stl .gcode file: pg-jaune_nose(with legs)-Ender-3 V3 KE_0.4_CR-PLA 215_7m.gcode Filament: PLA Yellow Velleman (~ 0,423m) ~ 00 h 07 m 51 s File(s): acc5.stl (scale 120% and brim) .gcode file: pg-rouge-scale1.2_acc5-Ender-3 V3 KE_0.4_CR-PLA 215_3m (2).gcode Filament: PLA Red Velleman (~ 0,164m) ~ 00 h 04 m 12 s File(s): standing gnome body(with legs).stl With a g-code M600 filament change added manually in the sliced file. To switch to the red filament .gcode file: pg-marronM600L251rouge_standing gnome body(with legs)-Ender-3 V3 KE_0.4_CR-PLA 215_3h11m.gcode Filament: PLA Skin color Velleman, PLA Red Velleman (~ 17,069m) ~ 03 h 17 m 51 s File(s): acc6.stl (scale 120%) .gcode file: pg-argent-scale1.2_acc6-Ender-3 V3 KE_0.4_CR-PLA 215_1m.gcode Filament: PLA+ Blanc ArianePlast (~ 0,088m) ~ 00 h 01 m 28 s After removing the printing supports, and removing the brim from the prints having them, pass a wire for the beads and glue the elements. Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Good continuation to all.