Creality K2 plus TPU Looking for tips on settings or tips trying to clean up a 1:24-1:25 scale model car tires Settings/values Nozzle Temp 220–235°C (start with 225°C) Bed Temp 40–60°C (60°C helps with adhesion) Print Speed 15–25 mm/s (slow = cleaner details) Retraction 0.8–1.2 mm at 20–30 mm/s (minimal retraction) Layer Height 0.12 mm or 0.08 mm for fine details Wall Line Count 3–4 (ensures roundness) Infill 100% or concentric pattern for realism Cooling 30–50% (too much = poor layer adhesion) Z-hop ON, ~0.3–0.5 mm (prevents smearing) Is there something I’m missing? For a proper print for TPU