👩🏻‍🍳🍭 Mason jar candy dispenser

Description

Source link : https://www.thingiverse.com/thing:2103924/files Summary There are some awesome candy dispensers here on thingiverse. I made this new one to save on filament (this single dispenser uses only .1 kg and the 3x dispenser uses only .22 kg), to be small, and to only dispense a small amount of candy per turn. I am using this at the receptionist desk of my office (to keep away from the open candy jar grossness) and at my house to stop the huge amount of candy given per vend. Further I added threads to the print (which many machines do not seem to have for some reason) that fit a standard mason jar. I also found that with the other candy dispensers the candy would get jammed or cut off in the tumbler while vending. I used to run a vending machine route as a teen, and remember we had to change out the professional machine's tumblers based on the types of candy/toys it was vending. So, I am designing tumblers specific to the types of candies, and marking the tumblers so they can be easily changed out. Since these are so small, I designed the tumblers with a slot to insert a quarter in the front to use as a handle. While I originally intended to glue the quarters in, I found if you fold a small amount of tape over the part of the quarter that goes in, it will hold firmly in place. The first tumbler is designed to work with Lemon Heads. It also works with jelly bellies, but not very well. It will consistently dispense two Lemon Heads without getting stuck (though the random malformed candy may cause problems I have not seen it yet).