🖨 Spool weight

Description

Source link : https://www.thingiverse.com/thing:2878127 ASSEMBLY Simply follow the video instruction to build your WYS. A very simple string able to support 2Kg will be fine. Just take care of the good positioning of the part 2 during the string assembly to get appropriate lengths of string between parts. Links to buy the hanging electronic balance on Amazon is country France http://amzn.eu/3Pk9de5 Germany search for "odowalker balance" in the search tool bar England http://amzn.eu/5Zf2f44 Spain http://amzn.eu/8YAPn2d USA http://a.co/6FBIAVZ INSTRUCTION FOR USE Two simple ways to proceed Either switch on the hanging electronic balance and once the zero value is stabilized (tare processing) simply pull the ring of part 5 and the weight will appears automatically. Or first pull out the ring of part 5 during tare processing (the hanging balance is then unloaded) and then release the ring to get the weight, In both cases, the hanging electronic balance will switch off automatically after 1 minute. To get the exact amount of remaining filament material, you’ll have to subtract of course the weight of parts 1 and 2 and the empty spool (about 240 grams, but better to get precise measurement of these two components). To make easier the calculation, you can use the free cylindrical space of part 1 to round the overcharge (see photo) to 300 grams. I used one screw and set of washers glued in the cylindrical space to round the total overcharge in my case. I didn’t find so far affordable hanging electronic balance able to keep tare memory, if you find one presenting similar shape factor, thanks to share the info. Print Settings Printer brand: Zortrax Printer: Zortrax M200 Resolution: 0,14 mm Infill: 50% Notes: I suggest orientation of the part on one of the photo. You can print all parts together in one single print but I personnaly perfer multiple prints to secure the operation.