🪴Typical bonsaï pot

Description

Source link : https://www.thingiverse.com/thing:2883422 Summary A pretty 17x10x3cm bonsai pot. Ideal for delicate trees like cuttings. It has two draining holes and 5mm high feet. Works really well in PLA. If you print it please show us how your tiny trees turn well in the pot :D Print Settings Printer brand: eMotion Tech Printer: i3 Metal Motion Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 10-15% Notes: Supports are theorically not necessary but using some could help to avoid little imperfections on the inside bottom of the pot. Because of the large surface in contact with the bed, a heating one is recommanded to avoid warping during the print ; 65°C should be ok for PLA. Post-Printing Gluing the feet You have to glue the four feet on the pot. There are little spaces helping for the positionning on the pot. Painting In order to make the pot really cute, I recommand to paint it. Obviously be sure to use a water proof paint. How I Designed This I was inspired by the work of Nigel Saunders on Youtube, so I decided to design my own pot for metasequoia cuttings. I worked on Fusion 360.