🚬 Toothless grinder

Description

Source link : https://www.thingiverse.com/thing:1682040/files I've been meaning to design & print a working grinder that doesn't leave bits of plastic in the mix.... Saw a design that took from flour mill grinding plates, read the reviews, it sounds as though it needed another iteration / quality control check. Improving upon the original, re-produced a similar design for you lovely, smokey printer fanatics - print in wood pla for a fantastic finish! It literally pulverizes and obliterates evenly up to 2g of herb within three turns. Please read the Print settings and see the image for assembly guidelines. Shredder2.0 here: https://www.youmagine.com/designs/toothless-herb-grinder-shredder-2-0-by-420threed Micro/Shred Here: https://www.youmagine.com/designs/micro-shred-by-420threed-toothless-herb-grinder Awesome Remix's (& other toothless grinders) here: https://www.thingiverse.com/guerillacaterpillar/collections/toothless-grinder-club Print Settings Printer: Duplicator i3 Rafts: No Supports: No Resolution: 0.25 Infill: 15 Notes: For a complete gRINDER you will need to print: 1x Top Case 1x Bottom Case - Leaf OR Heart (the Heart is a TM of 420ThreeD) OR 1xThicker Cases 1x Grinder Print the Case's together on 2xshells 0%infill Print the Grinder file separately: 3xshells 15%infil (min), top layers: 3 I cannot stress the 3x shells and 15% MIN infil enough, you don't want a holey print. Although over 25% is EXCESSIVE and it just wastes filament / time / money. 15% is great Happy Slicing! Post-Printing Once you've got all the parts out, Assemble the smaller grinder piece into the bottom, larger, case. Then slide the larger grinder piece into the top, shorter, case. Depending on the results from your printer you may need to glue the grinder pieces in to get a good turn. Happy Grinding!