35mm DrillStop

Description

Sorry This time i take som credit for this tools. and i doit because in my contry i sell it for real money. Everyone knows about the ordinary wooden drill stop. and often it does not sit properly, then it sits crooked or can not be tightened tight enough to move. And how many have not tried to set it to a certain depth and then you start drilling and discover so that it has moved up a bit or become crooked. At least I got tired of the ordinary wooden drill stops you can get. And went into the thinking box to find a better solution and easier. I would like to say that if you have first tried my Multi drill stop then you will not use any other tool to make certain depths on your holes. 3 sizes have been made. The actual locking head for drills is available in 45mm, 35mm and 25mm. The drill stop which is screwed onto the locking head is also available in 3 sizes. 45mm, 35mm and 25mm. But it is made how to put 45mm. locking head on drill so you can put both 45mm, 35mm and 25mm drill stops on. Conversely, you can also set 25mm. lock head on and then use all 3 sizes for it. And when you have previously put the locking head on and tightened the screw. Then you only have to turn the brush stop up and down depending on the desired height. You do not have to loosen a screw every time and bother with it not tightening. for on this tool here, tighten the screw on the drill where it is smooth. A counter nut has also been made if you want to tighten the drill stop and nut together so that it fits extra tight. Once you have printed the tool, turn it just a few times completely together and out so that it just gets cut if necessary. impurities away which may occur when printing it. Should you try this tool then finally write if you have kept the regular stops or you have done like me thrown them far away. If you thought my stuff is useful then you should be more than welcome to make a donation and you can do so here. https://ko-fi.com/jmbo50534 and give me a donation :)