CR-10 Smart Pro Gantry Camera Mounts

Models Description

Standard version is designed to look just down on the hotend giving a better view on the print with the nozzle The LOW version is designed to look up on the hotend giving a better view of the nozzle. I have tested both models. Both designs are created to mount the base vertically with the camera on top. This give more motion to the camera. The mounts are TIGHT. when putting on, Snap the BOTTOM clip part on first and them firmly press the top accross to snap it into place. I used Velco straps, but There is a hole to mount the base to the bracket.