Spice rack / kitchen utensil rail

Models Description

A modular spice rack and kitchen utensil rail system – for individualizable and scalable usage. Since most of us do not have the OCD to store every spice in the same sized container - I came up with a modular rack that can hold spices of different size. The rail system can also hold a variety of other kitchen utensils. Parts: - Rail in 300, 250, 200, 150, 100 mm length - Diameter of the two screw holes: 5,5mm - Hook - Spice holder hexagonal in 44, 54, 64 mm – for spices up to that diameter - Spice holder rectangular 44mm – for spices up to that side dimension - Utensil holder 44mm - Knife block in 40 and 60 mm – for knifes of up to that blade depth - Cloth holder Instructions: 1. Print as many parts as needed 2. You can either screw or glue it onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape. 3. Push in the parts from the side 4. Enjoy! Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none Make sure that your bridging relevant settings are calibrated for this design. Those include fan speed, print speed, and print temperature among others. There are many guides for good bridging on Youtube. My personal experience is that the best result is achieved with a quite unspent nozzle. If you experience any problems, please feel free to contact me on twitter or Instagram