Description
Flexible Scorpion was printed down to 90%. I wouldn't go to small because of the joints. Tail can prop up and claws open and close and move. I made this because a friend of mine wanted me to make one :)
10 to 15% infill
3 to 4 lines
.1 or .2 height
No support
Print in place
Small Curl STL
I added the 3d Builder mesh edit files as well. I have noticed that sometimes the 3d builder stl doesn't show up on the plate in Cura so what I do is click on the files name to the left bottom then then right click and click on center object then it shows up in the center. I hope this helps you.
Please feel free to post pics of your makes. I would love to see them. If you would like to sell the prints join us on Tribes for a seller's permit. These files are for personal use only unless you have the seller's permit. Editing is allowed only after asking the maker if you can do so.
https://www.patreon.com/TheDragonsDen411
You can join The Dragon's Den Discord to exchange with me and the community. https://discord.gg/k2KFnXNuBV
