Description
If you print it out or use it in any personal renders please tag me on instagram @re_run__
Below I have three different recommended FDM printing methods/instructions.
1. Smooth Exterior
Model tilted 98°, heel to build plate (see image)
Nozzle Size: 0.8-1.0
Layer height: 0.4
Infill: 25%, Grid pattern
Material: Tpu (70a-85a tpu suggested)
Printing temperatures per filament type and brand
Print speed: 15-20mms
Support: 20-25%, ZigZag pattern
Build plate adhesion: Raft, 10-15mms extra margin
2. Smooth Exterior
Model tilted 98°, heel to build plate (see image)
Nozzle Size: 0.4
Layer height: 0.2
Infill: 30-35%, Grid pattern
Material: Tpu (70a-85a tpu suggested)
Printing temperatures per filament type and brand
Print speed: 25-30mms
Support: 20-25%, ZigZag pattern
Build plate adhesion: Raft, 10-15mms extra margin
2. Textured Exterior
Model tilted 98°, heel to build plate (see image)
Nozzle Size: 0.4
Layer height: 0.2
Wall thickness: 0mm
Top/bottom thickness: 0mm
Infill: 35-45%, grid pattern
Material: Tpu (70a-85a tpu suggested)
Printing temperatures per filament type and brand
Print speed: 25-30mms
Support: 20-25%, ZigZag pattern
Build plate adhesion: Raft, 10-15mms extra margin