K1 Max lid storage

Description

When printing PLA on the K1 max I need to leave the lid off as it gets quite hot in the loft where I have my printers and as its glass I was wary of where I put it not wanting to knock it over and break it as space is at a premium so I designed this side panel storage slot for the lid which works really well. There is only the left side in the .3mf file as all you need to do is mirror it in your slicer of choice. I used Creality print PLA 0.2mm layer height no supports. You wil need new CSK M3 screws to fix them on about 5mm longer than the ones they replace. UPDATE. I have added by request 3D file of bothe left and right rails for those who cannot mirror the original file in the slicer they are using.