Design Concept

This design creatively combines the American flag and a bald eagle, symbolizing freedom and patriotism. The artistic splatter effect adds a modern touch.

Purpose

It serves as a decorative piece, great for wall display in homes or offices, especially suited for patriotic holidays or events.

Printing Recommendations

Thses settings are incluided in the .3mf (Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm)

Filaments Used: Filaments Used:

PLA Black

PLA Blue

PLA Red

PLA White

If you load the .3mf all you have to do is use the colors mentioned. (with a cfs)

If you do not have a cfs you can do it manualy by following the swap instructions.

You slice the print and then you tell the printer to pause at each layer mentioned and you change the filament yourself.

Swap Instructions:

Start with Black

At layer #6 swap to Blue

At layer #8 swap to Red

At layer #12 swap to White for the rest.

Assembly Instructions

The model is a single piece; no assembly required. Simply display as desired.

The Model is 240x150mm in size

American Pride

Cheesy_Prints 3D

Tetapan Cetak(1)

0.2mm layer, 2 walls, 15% infill

Penerangan

Lesen

Tag

Model Berkaitan