This borrow_tree - terrain model is made by SMT_M

It is well Crafted detailed model of Tree. i have printed it this stl file model on scale 200%. I have added NormaLmanual snug support to model at hanging portion only. Also Activate the "Make overhangs printable option" for more supporting.

I have used the PLA Material. It was very challenging to print in FDM in small scale. I done it. it looks cool.

Material Used: PLA+ White

Print Parameters:

1) Slicer Software : Creality Print 6.0

2) Printer: Ender3 KE.

3) Profile mode: Normal Quality (0.2mm)

4) Infill: 15% (Gyroid Pattern)

4) Scale: 200%

5) Retraction: 2mm minimum.

6) Print Speed: 300mm/s.

7) Printing Temp: 220 0 c.

8) Bed Adhesion: Auto.

9) Support: Normal Manual (Snug)-At hanging portion only (Base Pattern Spacing 2mm).

Note: Before printing Make sure Bed is well adhered with glued for perfect first layer.

I didn't find any issue with print. Go ahead with KE.

Hope You like it..!! Thanks for Watching..!! Happy Printing.

borrow_tree - terrain

SMT_M 🦊

Tetapan Cetak(1)

0.2mm layer, 2 walls, 15% infill

Penerangan

Tag

Model Berkaitan