This is a simplified and flexible Enigma model with up to 3 rotors plus reflector (images show 2+R). The parts can be sticked together flexible and the rotors snap to letter positions. The different rotors are marked with dots on top.

Parts

There are several parts, that must be combined to a single object in the slicer and set to different colors.

Base = Basisteil (DE/EN) + Basisteil_Beschriftung (DE/EN) + Basisteil_Logo

Rotor X = Rotor X + Rotor X_Beschriftung

inner Rotor (same for all) = Innenteil + Innenteil_Beschriftung

Reflector = Reflektor + Reflektor_Beschriftung

inner Reflector = Reflektorinnenteil + Reflektorinnenteil_Logo

For a minimal Enigma you’ll ned the base, one rotor + inner rotor and the reflector + inner rotor. Add up to two more rotors + inner rotors for an advanced version.

Printing

- dual color

- 0.2mm layer height, 0.4mm nozzle

- 2 walls

- 5 top / 3 bottom layers

- 6% cubic infill

Assembly

Place the rotor (reflector) on your desk with the letter at the bottom (upright letters) and stick in the inner part from above until it snaps (lift the rotor for this), then press the rotor in the base or another rotor.

Enigma

Tobi W_

Ustawienia druku(1)

0.2mm layer, 2 walls, 15% infill

Opis

Licencja

Tagi

Powiązane modele