3D Printing Profile: Sculptural Parametric Form
This configuration is optimized to transform complex parametric geometries into high-end, gallery-quality design objects. Standard fast print settings will cause layer misalignment, stringing on the organic peaks, or ghosting. To achieve a premium aesthetic, the priority is mechanical stability and surface precision.

1. Material Selection & Physics
Recommended Filament: Matte Silk PLA or Ceramic Bio-composite PLA.
Aesthetic Benefit: Matte micro-textures absorb harsh reflections, hiding the typical "synthetic plastic" sheen, while a subtle silk or composite filler catches light naturally along the fluid, sweeping curves.
Color Palette: Off-white, sand, bone, or concrete grey. Avoid highly saturated colors or pure glossy black.
2. Layer & Shell Settings (Surface Quality)
Layer Height: 0.12 mm (Ultra-Fine). Mandatory for smooth transitions on steep, multi-axis organic curves and to minimize step-artifacts on the outer walls.
Wall Line Count (Perimeters): 3 or 4 (Minimum 1.2 mm total wall thickness). If set lower, the internal infill patterns will telegraph through to the exterior under studio lighting.
Outer Wall Speed: 25 - 30 mm/s. Crucial. Slowing down the outer boundary layer drastically reduces print-head inertia, eliminating ghosting and ringing on the wavy profiles.
Z-Seam Alignment: User Specified $\rightarrow$ Back or set to Sharpest Corner. Never use Random, as it will scatter micro-zits across the fluid faces, ruining the clean finish.
3. Mechanical & Cooling Control
Print Speed (Overall): 45 mm/s. Maintaining a lower, consistent volumetric flow ensures uniform layer bonding and identical surface sheen from base to peak.
Travel Speed: 150 mm/s. High travel speed cuts down on time spent transitioning between organic lobes.
Part Cooling Fan: 100% (After Layer 3). Essential for immediate solidification as the printer negotiates the steep overhangs and sharp peaks of the design.
Retraction: Enabled. For standard Creality Bowden setups, start with 5.0 mm at 45 mm/s (or 1.2 mm at 40 mm/s for Direct Drive conversions) to prevent fine hair-stringing between the tips.
4. Structure & Infill
Infill Density: 10% - 12%.
Infill Pattern: Gyroid. Gyroid offers fully isotropic distribution, meaning it supports the undulating walls equally from all internal angles without creating localized mass concentrations or visible flat spots on the skin.
Top Layers: 0 (Open Top). Ensure your slicer recognizes the form as a hollow vessel structure so it doesn't attempt to bridge or close the top opening.

Fluid vase

CGC

Ustawienia druku(1)

0.2mm layer, 2 walls, 15% infill

Opis

Licencja

Tagi

Powiązane modele