Printable 3D star as hanging Star or Christmas tree topper in dodecahedron shape.

Easy to light up! G4 holder integrated. Suitable e.g. https://amzn.to/4nTlmx7

Alternatively also with LED Stripes or similar Light Source.

Print Required:

11x Tips

25x Connectors

Now you have 2 Options

1x Bottom with large hole to put over the tree

1x Hanging Top with Hole for Cable or String

Printing:

Print the Tips with 2 walls and zero infill the rest could be standard!

It is possible to print the tips individually in spiral vase mode. In this case you must print 25 solid bottom layers.

Diameter assembled approx. 240mm

Tip length approx. 90mm

Assembly:

Push the Connectors in the slots, to hold 2 tips together.

You can use some glue if you want. Use flat-nose pliers for the last pieces, if you have thick fingers like me. 😊

The last tip is the “bottom” or “hanging top”, you just press it in. It should stop on its own.

So you can light it up with G4 or other light source.

Happy Printing 😊👍

I hope you like the parts and it would be great if you follow me and check out my other projects!🧐

Commercial license you can get here:

https://www.patreon.com/BamBamDesign/

lights