ℹ All my 3mf files are coming with pre painted Supports for the Head!

ℹ Yes it can stand!

ℹ Tips for printing:

Filament: PLA

Supports: Yes! Only for the head!!

Layer height: 0.16mm

Wall loops: 3

Infill: 15%

Seam position: back

Wall generator: -

Detect thin walls: -

Brim: Normally No! But if you have any problems with adherence to the build plate I would recommend a brim!

BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

Info‼: Do not scale the Cat any smaller otherwise the connections will no longer work!

Info‼: If you apply too much force to the legs they may break because the connections are small!

Info‼: Please be careful when removing the Cat from the print bed!

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (1 Color):

PLA Matte / Bone White