Hi ! My print of "Seraphim - Arch Angel - PRESUPPORTED - 32mm Scale" by "Printed Obsession" Printer: "Halot-Mage Pro" File: "stl-seraphim-full-supported.stl" ( Presupported version ) Scale: 100% Sliced with: Halot Box (v4.5.0.3692-win64) Layer height: 0.05 mm, without anti aliasing Resin used: Creality Water Washable Resin Plus White Exposure time of normal layers: 2.3s ( printing environment temperature: ~12°C ) After a quick soak in a "dirty" 99.9% isopropyl alcohol bath, removal of most of the printing supports, cleaning again but this time in a "clean" 99.9% isopropyl alcohol bath, a drying time, a UV treatment (~2 minutes) and removal of last pieces of printing supports. Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !

02:50 11-11-2023

Seguir

Parâmetros de Impressão

Método de Impressão：Resina

Tipo de Dispositivo：HALOT-MAGE PRO 

Material：Creality Water Washable Resin Plus White

Altura da Camada：0.050mm

Precisa de Suporte：Não

 Denunciar



《My "November 3D Printing Event" entries 》 Portfólios

Comentar



Foto