Hi ! My prints, of "Frog keeps jewelry (not support)" by "Aslan3D". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). The most constant temperature possible with a silk filament, avoiding the risk of obtaining variations in color shades due to variations in printing temperature. Parameter config "Normal" (0.20mm). In hindsight I should have specified the position of the Z seam at the back. ( Parameter config "Normal 0.20mm", (Advanced,) Shell, Z Seam Alignement: User Specified, Z Sream Position: Back.) File: sapo.stl Scale: 100% Printing Time: ~ 2 h 02 m 06 s Two printouts of the same ".gcode" file One with PLA Silk Green ArianePlast the other with CR-PLA Rainbow Creality (The color variation is very subtle, I probably would have had to print several models on the same plate to have a faster variation.) Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Good continuation and happy holiday season to all. 🎄🎉🌟