Hi ! My print, of "SUPER MARIO PIPE KEY HANGER - PEACH" by "MECH3D PRINTING". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% File(s): KEY-0112 - PART.stl .gcode file: smpkh_p_noir_KEY-0112 - PART-Ender-3 V3 KE_0.4_CR-PLA 215_44m.gcode Filament: PLA Recyclé ArianePlast (~ 2,832m) ~ 00 h 48 m 01 s ( As I had a lot of difficulty removing the strong arborecent supports, I made another version sliced differently oriented and with normal supports. I have print it but not used it yet. .gcode file: smpkh_p_noir-rot_KEY-0112 - PART-Ender-3 V3 KE_0.4_CR-PLA 215_35m.gcode Filament: PLA Recyclé ArianePlast (~ 2,542m) ~ 00 h 38 m 12 s ) File(s): KEY-010 - HOLE.stl .gcode file: smpkh_p-vert-KEY-010 - HOLE-Ender-3 V3 KE_0.4_CR-PLA 215_2h15m.gcode Filament: PLA Silk Vert ArianePlast (~ 19,468m) ~ 02 h 19 m 56 s File(s): KEY-011 - PART.stl .gcode file: smpkh_p-vert-KEY-011 - PART-Ender-3 V3 KE_0.4_CR-PLA 215_53m.gcode Filament: PLA Silk Vert ArianePlast (~ 7,579m) ~ 00 h 56 m 43 s File(s): PEACH.stl .gcode file: smpkh_p-blanc-PEACH-Ender-3 V3 KE_0.4_CR-PLA 215_55m.gcode Filament: PLA+ Blanc ArianePlast (~ 3,757m) ~ 00 h 59 m 34 s File(s): KEY-0113 - PART.stl .gcode file: smpkh_p-blanc-KEY-0113 - PART-Ender-3 V3 KE_0.4_CR-PLA 215_23m.gcode Filament: PLA+ Blanc ArianePlast (~ 2,956m) ~ 00 h 24 m 56 s File(s): KEY-020.stl (x2) .gcode file: smpkh_p-blanc-KEY-020-KEY-020-0-Ender-3 V3 KE_0.4_CR-PLA 215_21m.gcode Filament: PLA+ Blanc ArianePlast (~ 0,787m) ~ 00 h 22 m 20 s File(s): KEY-015.stl .gcode file: smpkh_p-blanc-KEY-015-Ender-3 V3 KE_0.4_CR-PLA 215_18m.gcode Filament: PLA+ Blanc ArianePlast (~ 0,455m) ~ 00 h 19 m 08 s File(s): KEY-016.stl (x3) .gcode file: smpkh_p-blanc-KEY-016-KEY-016-0-KEY-016-1-Ender-3 V3 KE_0.4_CR-PLA 215_1m.gcode Filament: PLA+ Blanc ArianePlast (~ 0,096m) ~ 00 h 01 m 30 s After removing the printing supports, correcting the printing burrs, assembly. I quickly painted the head, with acrylic markers exchanged in the Creality Cloud gift shop... but I have to rework the small details on the areas that are difficult to access with the relatively large tips of the markers...) Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Print made as part of a test of the Creality "Ender-3 V3 KE" for https://www.lesimprimantes3d.fr/ https://www.lesimprimantes3d.fr/forum/topic/56116-creality-ender-3-v3-ke-la-d%C3%A9couverte-avant-le-test/ Good continuation to all.