How about some texture? Creality Print has added fuzzy skin, and I've had some fun testing out the different settings. I made 3 of these so far with different Fuzzy Skin settings. I changed the dragon to 65% the normal size so I could print 2 per build plate, which worked out great for the testing. I kept all other settings the same for the prints to ensure the only differences were the Fuzzy Skin. 15% Infill Grid Pattern Printed on PEI Textured Plate with 45 degree temp 50 initial layer print speed All other settings are "normal" in Creality Print Fuzzy Skin Settings: Silver Bottom/Navy Top: Thickness .4, Density .2, Point Distance .2 Pink Bottom/Lime Top: Thickness .1, Density .1 Point Distance 10 Purple Bottom/Pink Top: Thickness .2 Density .1, Point Distance .3