Introducing the Hexcell Fidget Flexi Grids!!

A fun new twist on our Sliding Fidget Cube toys! Features the same satisfying kinetic experience with a whole new hexagonal grid shape. These fun fidget toys slide and stretch back and forth for endless entertainment. Use them for stress relief at the desk or as a simple way to keep hands busy. Hex columns slide back and forth to create an endless number of shapes from a single grid!

Includes 4 versions with 4, 5, 6, and 7 hex cells on each edge for multiple different sizes of grids! Also includes a small 2x2 version for testing your print settings and new filaments before committing to printing an entire grid.

These fidgets provide a satisfying way to cure boredom or keeps your hands busy at your desk!

FDM 3d printing. Do NOT use supports because it can obstruct the sliding shafts. Prints in place in most materials (no TPU) with standard settings.

Printed in PLA on an Bambu Labs A1 Mini:

- 220 degree nozzle temp

- 60 printing bed temp

- 0.20mm quality

- Infill: 15%

- Brim: NO

- Supports: NO

As long as your printer is dialed in and accurate, the toys should slide smoothly right off the printer. Make sure to have stringing in check to prevent parts from fusing together.

Thanks for checking it out! Head over to my page and follow for more fun prints!