Hi ! My print, of "SQUARED SCROOGE MCDUCK" by "MECH3D PRINTING". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% File: BRK-060.stl (with a brim) Filament: PLA+ Marron 4043D ArianePlat ~ 00 h 04 m 05 s File: BRK-061.stl (with supports) Filament: PLA Light Blue Velleman ~ 00 h 17 m 55 s Files: BRK-063.stl (x2), BRK-064.stl, BRK-068.stl Filament: PLA Red Velleman ~ 00 h 08 m 48 s Files: BRK-040.stl, BRK-048.stl, BRK-049.stl, BRK-062.stl Filament: PLA Yellow Velleman ~ 00 h 13 m 47 s Files: BRK-065.stl, BRK-041.stl, BRK-042.stl (x2) (with supports) Filament: PLA+ Blanc ArianePlat ~ 00 h 48 m 18 s File: BASE.stl Filament: PLA Recyclé ArianePlat ~ 00 h 09 m 59 s Files: EYE.stl (x2), BRK-069.stl, BRK-067.stl Filament: PLA Recyclé ArianePlat ~ 00 h 12 m 18 s In hindsight, I should not have changed the orientation of certain parts before slicing to save on printing supports. Because the change in orientation either made them more fragile (the hand holding the stick) or probably reduced their details due to the layer height. In addition, I used an autobrim on the very small elements. Which complicated post-processing for me and they would probably have held perfectly to the plate during printing (except for the stick where the brim seems essential to me) After deburring, assembly and gluing. I still have to put small touches of white paint in the eyes. For certain elements, I would have liked a sort of impression or assembly pin or even a hole to pass a piece of printing filament through in order to have a sort of articulation (for example for the head there it is glued. But, for me, having an assembly key/cavity that allows a little rotation would have been a plus) Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Print made as part of a test of the Creality "Ender-3 V3 KE" for https://www.lesimprimantes3d.fr/ https://www.lesimprimantes3d.fr/forum/topic/56116-creality-ender-3-v3-ke-la-d%C3%A9couverte-avant-le-test/ Good continuation to all.