The essential companion to the Perfect Little Table.

https://www.crealitycloud.com/model-detail/perfect-little-table-sturdy-practical-childs-table

🚀 Standing at an ideal height of 210mm (8.3 inches), this is the perfect piece of furniture for toddlers mastering independent tasks—from reaching the sink to climbing into their favorite chair. While perfectly sized for toddlers, this stool is rigorously tested to comfortably withstand over 100kg (220+ lbs)! This means it's sturdy enough for parents and older siblings, too, offering true peace of mind. This stool is an attractive addition to any modern playroom, nursery, dining room or bathroom.

💪 Perfectly Safe & Stable: The design includes an optional space for rubber non-slip pads on the base of the legs, ensuring the stool stays firmly in place on hardwood or tiled floors. Size of pads up to 14mm (0,55inch).

👑 This stool is genuinely Kid-Proof. This design has been put through a year-long toddler torture test—surviving spills, tipping, bashes, and being dragged across the floor, etc... Better yet? It's Parent-Approved and certified strong, personally tested to support over 100 kg without breaking a sweat. Print with confidence.

Settings & Materials I used:

- eSUN PLA+HS,

- 0.4mm nozzle,

- 0.2mm layer height,

- 4 walls, 5 bottom / 5 top layers,

- 25% Infill (Archimedean Chords),

- No supports.

Bill of materials:

- M4 x 8.1 threaded inserts // 6 pcs

- Countersunk head bolts DIN 7991 M4 x 20 // 6 pcs

- Self-adhesive Anti slip Pads 14 x 3 mm // 4 pcs (optional)

🛠️ Follow these simple steps to assemble your durable child's stool:

1. Preparation

- Clean & Prep: Gently clean all 3D-printed parts and lay them out on a clean, flat surface.

- Insert Threaded Inserts: Using a soldering iron (or appropriate tool), insert all 6 threaded inserts into their designated spots: two in the middle brace and four in the underside of the seat (top part).

2. Frame Assembly

- Attach Left Leg: Take the Left leg and the Middle Part. Align the pieces and secure the joint using one M4x20 bolt.

- Attach Right Leg: Add the Right leg to the assembly. Secure the new joint using a second M4x20 bolt.

3. Final Step: The Seat

-Secure the Seat (Top Part): Place the Top part (seat) onto the assembled leg frame. Align the four holes with the legs and secure it firmly using the remaining four M4x20 bolts. Stick Anti Slip Pads to the legs (optional). Your robust child's chair is now fully assembled and ready for use!