Drawer for the CFS rack designed by Layerforged3d

Creality Cloud Print Different - CFS Stand - Main Body From LionWei https://m.crealitycloud.com/en/model-details/69b0fe4dae5534c9fe748055

Model can accommodate x2 completed drawers

Standard configuration with notched front panel and perimeter gap filler:

Use all 4 panels (A,B,C,D)

Glue panels together with superglue and allow to cure fully before using.

Alternate configuration: Flat front, without cutout or perimeter gap filler (must drill hole for drawer pull knob, not included, but I recommend this model: Creality Cloud Print Different - Door handle From KC https://m.crealitycloud.com/en/model-details/645531ca58f57701c94b3e53 )

Use parts A (x2) and B (x2)

Glue panels together with superglue and allow to cure fully before using.

*optional: use a plastic welder with heat set inserts to the seams after glue has set to increase rigidity. I use this model: https://a.co/d/0hgTfRY2

A little dab of grease on the rail grooves will aide in smooth operation. If it still feels too tight, scale the model down to 98.9% (uniform)

Uncut drawer included in files, however due to the size, it will not fit most printers.

If you like this model, please like and boost.

I love to see your makes, and Remixes are always welcome. Creativity is what makes this community great!

And please give a special thanks to LionWei for designing the CFS stand that utilizes these drawers. In my opinion it’s the best single CFS stand with storage solutions available.