Description & Rambling:

Commander Deck Box for a standard 100-card Magic: The Gathering Commander deck. Locking lid mechanism allows for secure transport and is a perfect fit for sleeved or nonsleeved decks. The locking mechanism works on a compliant mechanism concept, where spring-loaded pegs are actuated by rotating the knob on the lid that cams the pegs when rotated. The 5 circles on the lid represent the 5 colors of MTG and can be filled with colored chips if you like, making the box a bit more stylish and personalized. Compared to other prints on the platform, this design is among the few with a reliable locking mechanism to keep your cards protected.

Print Instructions:

- Enable Supports (Recommended: Slim Tree Auto)

- Tolerances are designed for a 0.4 mm nozzle diameter

Assembly Instructions:

For Lid:

Start with the "Lid Housing" part and insert the actuator cap. On top of the "actuator cap", carefully insert the "spring latch" part so that all of the pegs go through the slots on the "lid housing" and overhang so that the outer edges of the pegs are flush to the outer edge of the "lid housing". Make sure the studs on the "spring latch" part are inserted into the grooves of the "actuator cap" part. Once these parts are assembled, use all-purpose super glue (I used "Krazy Glue") and glue the "encloser baffle" into place so that the flat side is flush with the bottom face of the "Lid Housing". Hold parts together firmly until the glue is cured.