This is a kit to build your own Litophane Lamps!

The Kit supports 2 types of LEDs Yellow/White or RGB LED

The kit gives you bottom stand which fits the LED light (either RGB or White/Yellow, print correct one), A peg to cover the cable cutout, top cover and a reflector to improve the litophane by reflecting the light from the top.

Materials required: (Links at bottom)

- White PLA (For reflector and Litophane), I used cheap White PLA

- Wood PLA (For Stand, Top Cover and Peg), I used Geetech Black Walnut

- LED Lights

- Silicone Feet 6x2mm

Litophane Print Settings:

- 0.1 mm layer, 0.2mm first layer, 5 walls, 100% infill, Inner brim 10mm, 50% print speed

Stand Print Settings:

- Not that important, I use 0.25 layer height and the rest default

Assembly Instructions:

- Place the LED light in the bottom stand and route the cable

- Place the peg in the cable cutout

- Push the Litophane on the bottom stand and add glue if needed

- Add the reflector to the top cover and add glue if needed

- Push the top cover on top of the litophane and add glue if needed

The litophanes are made using Itslitho.com using the following settings:

Photo resolution: 1948x1000 (this will give you 70mm x 100mm litophane)

Links:

RGB LED 31mm

https://www.alibaba.com/product-detail/5V-31mm-Diameter-RGB-Color-24keys_1601245353259.html?spm=a2756.trade-list-buyer.0.0.62e976e9o7iyHO

WHITE/YELLOW LED 31mm

https://www.alibaba.com/product-detail/Modern-Design-DIY-Custom-5V-Mini_1601402534016.html?spm=a2756.trade-list-buyer.0.0.62e976e9o7iyHO

6x2mm Rubber Feet

https://share.temu.com/FxA8AzXIH8B