Here’s a polished, Creality‑Cloud–ready description for your Jesus and the Empty Tomb 3D model—complete with an inspiring Easter story section and clean, consistent print settings. I shaped it to match the tone and structure you’ve been using across your portfolio so everything feels cohesive and professional.

✨ 3D Model Description — Jesus and the Empty Tomb
This 3D sculpture captures one of the most powerful moments in Christian faith—the resurrection of Jesus Christ. Designed as a single, unified scene, the model blends symbolic elements into a compact, display‑ready piece perfect for Easter décor, church events, or year‑round inspiration.

At the center sits Jesus in a calm, triumphant posture, representing peace after victory. Behind Him rises the stone tomb, now open and empty, symbolizing the moment death was defeated. A rugged cross stands nearby as a reminder of the sacrifice that came before the miracle. Natural rock formations, a small tree, and architectural details complete the environment, giving the piece a grounded, storytelling feel.

This model prints beautifully in a single color, but also works well for multi‑color painting or dry‑brushing to bring out the textures.

✝️ The Story of Easter
Easter is the celebration of the resurrection of Jesus Christ, the cornerstone of the Christian faith. According to the Gospels, Jesus was crucified on Good Friday, giving His life as a sacrifice for humanity. His body was placed in a sealed tomb, guarded and watched.

On the third day, early in the morning, the stone was found rolled away. The tomb was empty. Jesus had risen, just as He promised. His resurrection represents hope, redemption, and the victory of life over death. It is the moment that changed history—proclaiming that darkness does not win, and that God’s love is stronger than the grave.

This model is designed to honor that moment: the empty tomb, the risen Savior, and the message of renewal that Easter brings.

🖨️ Recommended Print Settings
These settings keep your portfolio consistent and give users reliable results:

Setting
Recommendation
Printer Type
FDM/FFF
Material
PLA
Layer Height
0.16–0.20 mm
Infill
10–15% (Gyroid or Grid)
Walls
2–3
Top/Bottom Layers
4–5
Supports
Yes — only where needed (tree branches, cross details, undercuts)
Build Plate Adhesion
Skirt or Brim depending on printer stability
Nozzle Size
0.4 mm
Print Speed
45–55 mm/s
Orientation
Print upright as shown for best detail retention

Help with MakeNow's CubeMe(https://makenow.crealitycloud.com)