Hi ! My print of "noot noot pingu" by "PressPrint" Printer: "Ender-3 V3 SE" (nozzel diameter: 0.4 mm) For all files Scale: 100% Sliced with: Creality Print v4.3.7 (Material "CR-PLA" (Head 205°C, plate 60°C), Parameter config "Normal") (Quality ->) Layer height: 0.2 mm, Initial Layer Height: 0.2 mm. (Shell ->) Z Seam Alignment: User Specified, Z Seam Position: Back Left, Z Seam X: 0.00 mm, Z Seam Y: 110.00 mm. (Infill ->) Infill Density: 10 % (Build Plate Adhesion ->) Build Plate Adhesion Type: skirt (Support ->) Generate Support: Yes, Support Structure: Normal, Support Placement: Touching Build Plate, Support Overhang Angle: 60.00°. File "body.stl" I used the “cut” function (planar cut) in Creality Print, to cut the model in two (in order to have two printable parts without supports and with the idea of obtaining wings/arms that are more solid than if they were printed with the initial orientation of the model), and another cut to have part of the belly printable separately with white filament. So for this file, this gives me 3 distinct sub-models, which I will have to reorient before printing. - both black parts (printed at the same time, on the same plate) Filament used: PLA Recyclé ArianePlast Printing time: ~ 1h21 - the belly, white part Filament used: PLA Eco Blanc ArianePlast Printing time: ~ 0h17 File "eyes white.stl" Filament used: PLA Eco Blanc ArianePlast Printing time: ~ 0h06 File "eyes black.stl" During printing I reduced the feedrate to 50%. To be sure to allow time for the already printed part to cool sufficiently. Filament used: PLA Recyclé ArianePlast Printing time: ~ 0h08 File "feet orange .stl" Filament used: Velleman PLA Orange Printing time: ~ 0h08 File "red.stl" During printing I reduced the feedrate to 50%. To be sure to allow time for the already printed part to cool sufficiently. Filament used: Velleman PLA Red Printing time: ~ 0h05 Post-print processing sanding/scraping the printing defects, deburring, assembly and gluing. I still have to do a quick blast with a heat gun to remove the last angel hairs. Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !