Hi ! My prints, of "the great cube container" by "PressPrint". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% outside bottom (white).stl PLA Eco Blanc ArianePlat 0 h 31 m 46 s boutton (white).stl PLA Eco Blanc ArianePlat 0 h 02 m 52 s inside print in place (black).stl PLA Recyclé ArianePlast 1 h 08 m 44 s red part x2.stl (x2) PLA Red Velleman 0 h 12 m 07 s outside top (blue).stl PLA Bleu métalisé ArianePlast 0 h 36 m 12 s After assembly and gluing. In hindsight, the interlocking clearances are a bit too tight and I probably should have used a horizontal expansion of -0.05 mm or -0.1 mm to facilitate assembly. Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Good continuation and happy holiday season to all. 🎄🎉🌟