Hi ! My print, of "SQUARED PERRY THE PLATYPUS" by "MECH3D PRINTING". Slicer: Creality Print v4.3.8.6678 (Win). Printer profile "Ender-3 V3 KE_0.4 nozzel". Material profile "CR-PLA_1.75" modified (Temperature, Printing Temperature: 215.00 °C, Initial Printing Temperature: 215.00 °C, Final Printing Temperature: 215.00 °C, Auto Temperature: No.). Parameter config "Normal" (0.20mm). Scale: 100% File(s): BRK-X011.stl (x2, one in mirror), BRK-X013.stl, BRK-X014.stl .gcode file: sptp_jaune_BRK-X013-BRK-X014-BRK-X011-BRK-X011-0-Ender-3 V3 KE_0.4_CR-PLA 215_18m.gcode Filament: PLA Yellow Velleman (~ 2,062m) ~ 00 h 19 m 33 s File(s): BRK-X015.stl, BRK-X017.stl .gcode file: sptp_maron_BRK-X017-BRK-X015-Ender-3 V3 KE_0.4_CR-PLA 215_16m.gcode Filament: PLA Marron ArianePlast (~ 3,585m) ~ 00 h 16 m 45 s File(s): BRK-X012.stl // Splited using the Mesh Tools Ultimaker Cura plugin, then group into 4 different pieces, to no longer have to use printing supports. .gcode file: sptp_bleu_BRK-X012-splited-brasG-brasD-corps-tete-Ender-3 V3 KE_0.4_CR-PLA 215_51m.gcode Filament: PLA Light Blue Velleman (~ 10,594m) ~ 00 h 52 m 50 s File(s): EYE.stl (x2), BASE.stl, BRK-X016.stl .gcode file: sptp_noir_BRK-X016-EYE-BASE-EYE-0-Ender-3 V3 KE_0.4_CR-PLA 215_16m.gcode Filament: PLA Recyclé ArianePlast (~ 3,209m) ~ 00 h 16 m 41 s After gluing the different elements Posted as an entry to the "Christmas 3D Printing Event!" https://www.crealitycloud.com/post-detail/65839ead3e2577f851884efd https://www.crealitycloud.com/contest/christmas-3d-printing-event Good continuation to all.