You are welcome to follow us on Instagram (sektor7_studios)

OUR NEW UPGRADE FOR THIS VERSION IS ONLINE! JUST DOWNLOAD THIS MODEL NEW AND PRINT THE NEW PARTS.
YOU CAN PRINT THE RAISER WITH THE HINGE OR WITHOUT THE HINGE!

---> FOR THE HINGE VERSION USE OUR ADDITIONAL INSTRUCTION

Introducing the Ultimate Lid Extension for Your Creality K1 & K1C 3D Printer! (no supports needed)

Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 & K1C 3D printer, designed to elevate your printing projects to the next level.

**THIS IS VERSION 1 --> WITHOUT SWING-ARM**

★ We have designed two different versions:

- Version 1 (this one, without SWING-ARM)
- Version 2 ( Upgraded version with SWING-ARM, for advanced users) ---> https://www.crealitycloud.com/model-detail/6635542a8e22f8a77fefc956

Both versions have their advantages, choose the one you like the most!

★ OUR STL FILES OFFERS YOU:

- Perfect Fit on Creality K1 & K1C
- Enhanced Functionality
- Improved Print Quality
- Easy Installation
- Noise reduction
- More moving space for the Bowden tube
- Air supply regulation & indirect control of the temperature
- Bowden tube passage to the back and side (you can choose)
- Detailed assembly instructions are supplied as a download
- Detailed print settings are supplied as a download

★ THE FOLLOWING PARTS MUST BE PRINTED:

- PART_RAISER_K1 (3 times)
- PART_BACK-RIGHT_RAISER_K1 (1 time)
- TOP-COVER_LOCK (1 times)
- SLIDER (8 times)
- CONTROLLER_WITH_LOGO (8 times) or CONTROLLER_WITHOUT_LOGO (8 times)
- NEW: WITH A HINGE CONSTRUCTION

★ PRINT SETTINGS

(Please read the INSTRUCTIONS and the PRINT SETTINGS)

Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary)
Nozzle: 0.4mm
Infill: 15%
Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer height)
Walls: 2
Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing)

Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)

★ Take a look at our other suitable upgrades:

K1 FAN SILENCER --> https://www.crealitycloud.com/model-detail/662e71008e22f8a77fd4be36
FILAMENT HOLDER --> https://www.crealitycloud.com/model-detail/660d6c3a34034d98950a25c2
K1 MAX RISER (VERSION 1) --> https://www.crealitycloud.com/model-detail/66d807316afb3f8da13fc388

★ The Raiser has so far been printed on the following printers. Both could be used to print without support structures:

K1
K1C

★ If you have any questions feel free to contact us. You can contact us under the following email:

support@sektor7.studio

★ You cant find our Instructions?! Then here is our download form:

https://sektor7.studio/creality-k1-k1c-raiser-upgrade-version1/#lepopup-k1-k1c-v1-instructions