

The K1C Lid Riser with hinges! Keep your lid attached and stop having to find a place for it when you get into the printer. The K1C Lid riser system consists of 4 supports that screw to the top of the K1 or K1C.

You need

Front

2 Creality K1C raiser front corner

1 Creality K1C raiser front

Left

1 Creality K1C raiser outside left

1 Creality K1C raiser middle

1 Creality K1C raiser inside

1 Creality K1C raiser knob

Right

1 Creality K1C raiser outside right

1 Creality K1C raiser middle

1 Creality K1C raiser inside

1 1 Creality K1C raiser knob

Back

1 Creality K1C raiser Hinges

1 Creality K1C Lid Riser Betweener - Back (Filled)

Print parameters

• Slicer software: Creality Print

• Printer: K1C

• Filament: generic-PLA 1.75

• Infill: 15%

• Nozzle Temp: 220°C

• Bed Temp: 60°C

INSTALLATION

1. Remove existing screws from top of K1C

2. Snap the pieces together and place it on top

3. Attach the Creality K1C Lid Rise, using m3x30mm screws to top of K1C

Additional parts required

Four M3x30 screws to secure the corner pieces

Better hinge pins: I used 2 2.5 mm steel nails for this hinge, I cut them to 40 mm long