Here is another little addon for the Creality K1 / K1C. The cutter holder is designed for securely attaching to the front side panel of the K1 or K1C cabinets, providing easy accessibility and storage for your cutting tools. This holder keeps your cutters organized and within reach, enhancing workflow efficiency in a tidy setup.

PLA or PETG is recommended.
0.20mm Layer Height
2 Walls
10% Rectilinear Infill
Tree Support needed ONLY if printed lying flat.
I am including two print setting files along with the STL..
a CFS Coloured file (Holder lies flat and the logo is painted)
a Mono Single Colour File (Printed upright without any need for supports)

You will need 2x 10mm M3 screws.
I initially made countersink holes for the screws but found that it wasn't strong enough - so I raised the offset around the holes to keep it solid.
The stock screws will not be long enough. Store them and use 2x 10mm M3 screws to secure the holder. Do not use screws longer than 10mm. Be careful - check the inside of the printer to make sure your screws don't damage or interfere with any internal parts. 10mm was perfect for my K1C. Do not overtighten the screws

If you find this holder useful in any way - please leave a LIKE. Happy Printing!

cutters

2 (1).stl_PLA_1h12m43s