Hello reader,

I have attached a printing profile ("pew profile") that you must use with Ultimaker Cura ver. 4.0.0 which will allow you to print these kinds of parts. Structure is everything for these parts because you don't want layers to separate or for the thing to blow apart in your hands. If you're using gun model parts for a prop gun then it's fine to have lower infill percentage, though it will increase chance of breaking for each part. Supports are also extremely important for most big sections. (ex: Glock Frames) Depending on the part, you will have to tweak the profiles support section to get the desired strength and form. Which brings us to the printing material, you MUST use a strong material, I use eSun PLA+ which is a great material and relatively cheap. If you have any other questions about the process, please leave a comment here or on my profile and I will gladly help.

Text Form Links:

https://drive.google.com/file/d/13fqeRPwHQ-FOR3B-wxEbRPa75UI6OY6Z/view?usp=sharing

https://drive.google.com/file/d/19lsWflbbDMfQTCdgrQVCzKFij5iF239g/view?usp=sharing

How to Print Gun Frames & Other Parts