I've now almost finished converting my CR10s Pro V2 to direct drive using a Creality Sprite extruder. The conversion has been relatively simple even with changing the e steps in firmware (Although at some point I want to PID tune and adjust for the slight change of position for the BL touch (Now a CR touch). It is a big improvement in ease of use and print finish. I also think fine tuning will improve things even more. An update to slightly different firmware will make some fine adjustments very easy, the Tiny Machines firmware is said to be much easier to use with considerably more fine tuning accessible through the touch screen. I will update this post once I jump in to this part. Happy to provide detailed steps for those interested? Short video of it in action below.