This is “Santa gift house” looks so sweet and adorable design with a running sleigh around house, rotating Christmas tree and jumping snowman. Also house roof is removable you can gift whole set with placing small chocolate inside the house.In this file I have kept low number of Gcode file, as combining black parts together and white parts together, other single parts are kept as it is. I have uploaded both Gcode file and stl file. (I found limited slicing file upload up to 10, so I have generated 9 Gcode files).Print para: Printer Use: Ender 3 Max Neo Slicer: Creality Slicer 4.8.2File: "All Gift Boxes.stl" Profile: Standard Quality. Infill: 10%. Layer Height: 0.2mm Scale: 100%. Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Support: Yes. Pause Height: Layer-17, Layer-23. File: "House Roof Red & Sleigh.stl"Profile: Dynamic Quality. Infill: 10%. Layer Height: 0.16mm. Scale: 100%. Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Support: Yes.File: "All Black Parts.stl"Profile: Low Quality. Infill: 30%. Layer Height: 0.28mm Scale: 100% Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Support: Yes (Normal-Touching to bed). File: "All White Parts.stl"Profile: Standard Quality. Infill: 30%. Layer Height: 0.16mm Scale: 100% Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Support: Yes (Tree-Touching to bed). File: "Merry Christmas name Red-white.stl"Profile: Dynamic Quality. Infill: 10%. Layer Height: 0.16mm Scale: 100% Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Pause Height: Layer-4. Support: Yes (Tree-Touching to bed). File: "Tree set.stl"Profile: Standard Quality. Infill: 10%. Layer Height: 0.2mm Scale: 100% Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Pause Height: Layer-15. Support: Yes (Tree-Touching to bed) File: "Snowman Hat & Muffler Red white.stl"Profile: Super Quality. Infill: 10%. Layer Height: 0.12mm Scale: 100% Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Pause Height: Layer-14, Layer-24. Support: No. File: "HB-3 Blue.stl"Profile: Low Quality. Infill: 10%. Layer Height: 0.28mm Scale: 100% Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Pause Height: Layer-15. Support: Yes (Tree-Touching to bed). File: "HB-2 White.stl"Profile: Standard Quality. Infill: 10%. Layer Height: 0.2mm Scale: 100% Print Speed: 80mm/s. Nozzle Temp: 200 0 c. Support: Yes (Tree-Touching to bed) Assembly is very easy, Slide and fit. Use super glue for some parts to fix permanent.This is posting for Christmas 3D Printinghttps://www.crealitycloud.com/contest/christmas-3d-printing-event?tab=3Hope you like it & enjoy printing, Thank you for watching..!![%1951448743]