I tried the Creality Cloud mobile app slicer for the first time instead of Orca Slicer... it added a brim by default... I won't be using the cloud slicer again. Besides that, comments on the model: - great modelling details. looks cool. - the tolerances are MASSIVELY too much on the joints, like 20X - 30X bigger than they need to be, so everything ends up super floppy. - the backs of the shoulders are super thin, so they'll break easily and the arms will fall off. - the upper arms are raised off the ground by +/- 0.2mm? Unnecessarilly requires bridging. they could be on the bed level like the rest of the limbs. - in general, the back is more flat than it needs to be. obviously that was done to avoid overhangs, but this model would still be easy to print with overhangs of up to 40 degrees at the bottom. - some of this list was made worse by me not using the right slicer. If I'd used Orca or any PC-based slicer, I would've seen this stuff and fixed it before printing. generally good though. totally fine for a 6-year old to play with. I'll see how long it takes fer her to accidentally break the arms off. I'll give it 3 stars.