CHANGELOG

2025-10-25 The initial print setting was incorrect and was for the K2. I have many models and try to ensure all is uploaded correctly but sometimes errors happen. My apologies for this. I have uploaded the correct print setting. In addition to my apology I am also enclosing parts for a stand alone conversion (plate 6) which I had planned for a separate model. The stand alone stands work with the K2 model so that it can also be used for other printers. Thank you for your understanding.

MODEL

The model is for a side mounted built plate holder that can be used with the K2 Plus D3P Riser.

Click on link to find out more about the K2 Plus D3P Riser

K2 Plus D3P Riser

Features:

* The build plate holder can hold up to 8 build plates.

* It can be mounted on the left or the right side of the printer (as referenced when looking at the printer). The print setting has plates for mounting on either the left or the right side.

* Pdf instructions are provided (you need to download them separately

3D PRINTING

PRINT SETTINGS

IMPORTANT: After verification with Creality it appears that there are some issues that need to be resolved with the mobile printing app. At present it seems these may affect slicing and printing of the model. After verification, it was suggested by the Creality Cloud team to use the desktop slicing and printing software. Thank you for your understanding.

IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard