Hi ! My print of "eevee multicolor" by "PressPrint" Printer: "Ender-3 V3 SE" Files "eevee hair.stl", "eevee tail.stl", "eeveee head.stl", "evvee body.stl", "eevee eyes (black).stl", "eevee eyes (brown).stl", "eevee eyes (white).stl", "eevee mouth (black).stl", "eevee nose (black).stl" Scale: 100% Sliced with: Creality Print v4.3.6 (material "CR-PLA", quality "Normal") (Quality ->) Layer height: 0.1 mm (Infill ->) Infill Density: 10 % (Build Plate Adhesion ->) Build Plate Adhesion Type: skirt (Suppoort ->) Generate Support: Yes, Support Structure: Tree Strong, Support Placement: Touching Build Plate, Enable Support Brim: Yes Filament used: Several PLA+ Silk (Pink, White, Blue) ArianePlast, Velleman PLA Black. Be careful, some 3D models have geometric errors. And the slicing result may not be as expected. (With Creality Print v4.3.7.6619-win64, profil quality "High Quality", I obtained slicing results where some socket gaps were partially filled, I had to use the "Normal" quality profile with modifed layer height 0.1 mm (but not the initial layer height) to obtain consistent slicing during preview.) After removing the printing supports, sanding/scraping the printing defects, gluing and a quick blast with a heat gun to remove the last angel hairs. (I did not place and glue the nose, because it was poorly printed) Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !

14:58 11-09-2023

Seguir

Print Parameters

Printing Method：FFF

Tipo de dispositivo：Ender-3 V3 SE 

Material：Several PLA+ Silk (Pink, White, Blue) ArianePlast, Velleman PLA Black.

Altura de la capa：0.10mm

Velocidad de impresión：180.0mm/s

Need Support：Sí

 Reporte



《My "November 3D Printing Event" entries 》 Portfolios

Comentar



Imágen